02 October, 2009

Ripped Leggings DIY

Want to make leggings similar to these? Then here is a DIY for ya! You can click on the images to enlarge. Not sure if I have the guts to wear them...we will see ;) I used an inexpensive pair of leggings from forever21 to try this out and went for a more side slashed look rather than all around. You can use a pair you have already and get into the Crafth Habit.






(Image of Lady Gaga from http://www.pastrykicks.com/v5/wp-content/uploads/2009/06/lady-gaga-679-7.jpg)

7 comments:

  1. great :D thanks :) love it

    ReplyDelete
  2. once you've cut the slits do they get wider as you walk along or anything if that makes sense or do they hold?

    ReplyDelete
  3. The slits do not get wider as you walk, but you have to cut them smaller than the actual size you want them to be, since they do stretch due to the nature of the fabric. I would suggest using a really cheap pair of leggings or a pair you have already if you are worried about the slits getting bigger, just to test it out :)
    Hope that helps!

    ReplyDelete
  4. so what type of material would best fit for this design

    ReplyDelete
  5. reeciie, the leggings that I used are made out of fabric that is a mix of cotton and spandex.I bought the leggings then put the slits into them.

    ReplyDelete

Thanks for visiting Crafty Habit! I love to hear from you :)

Page Numbers

Blogger Tips And Tricks|Latest Tips For Bloggers Free Backlinks